significantly extend the life of your TSC100 SLAT CLEANER
Clean Regularly
Tools should be cleaned at the end of every shift and before they are stored away for the night. You can wipe dirt and other particles from the outside casing with a good Clean Cloth. Remember to pay special attention to the cutting tool gaps and clean them if necessary.
Inspect Cutting Tools
Reduced POWER usually means that the cleaning tools have become worn, they can not be re-sharpened but are easily replaced. There are two options Cleaning Tool No. 2 | 2-2.9mm | 1644868 and Cleaning Tool No 3 | 3-3.9 | 1644867, both come as a set of two blades and include a seal (1633583).
Check Seals
Check the seals regularly and replace them in the event of damage. Check the sliding discs, outer seal and seal each time you come to use the tool. Watch the short video below to learn how easy this is to do.
Regular Servicing
By far the best way to ensure that you continue to get the best results from your SLAT CLEANER is with regular servicing by qualified engineers.
As an APPOINTED TRUMPF SERVICE CENTRE we have developed a comprehensive SLAT CLEANER SERVICE and includes the following
- Your Slat Cleaner will be stripped and cleaned
- LED SEAL checked and replaced if necessary *
- PINS, BRUSHES & JAWS replaced & the BASE PLATE checked
- All mechanical parts greased, reassembled and tested
- Electric cable and circuits tested and checked *
*replacement parts will be added to the standard service charge.
Book Your Service
Please complete the form below. You will receive a confirmation email with details of what to do next. Any queries please call 01772 557700.